SciCan Statim 2000 Manual del operador descargar pdf (Pagina 39)

7. Continue to press the paper advance

button

until the paper feeds through

the paper exit slot on the front of the

printer. Then, move the paper roll

and

arm into the operating position and close

the printer door

. The printer is now

ready to operate.

When you see a red line on one side of the

paper, it is time to replace the roll.

If a paper jam occurs, and the paper cannot

be removed by pressing the paper advance

button

, do not pull the paper backwards

through the printer.

Never put a utensil or tool into the paper exit

slot. For full instructions on how to remove

paper jams, see section 7.2 Removing

Internal Printer Paper Jams.

To replace the paper roll

, follow these

steps:

1. With scissors, cut the paper between the

roll and the paper feed slot

2. Remove the roll from the arm and discard

the unused portion.

3. Press the paper advance button

feed the paper that remains in the printer out of

the slot at the front of the printer.

4. Install the new thermal paper roll by following the

instructions described in this section.

7. Internal Printer (Not on all models)

Figure 15.1

Figure 15.2

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 48 49

Sin comentarios

SciCan Statim 2000 Manual del operador Pagina 39